#4 Stone vs #411 Gravel: Size, Cost, and Which to Use

#4 Stone

Sieve size #4 in the ASTM aggregate grading means most of the stone passes a 1.5-inch screen and stays on a 3/4-inch screen. In practice you get a pile of roughly walnut to golf ball sized rock. Every piece is angular because it was crushed, and those sharp edges lock together under load instead of rolling like river stone. Because it is washed or screened clean, there are no fines to fill the gaps between pieces. That is the whole point: about 35 to 40 percent of a pile of #4 is air, so water moves through it fast.

#411 Gravel

#4 Stone

• ✓ Driveway and road base
• ✓ Drainage beds
• ✓ Retaining wall backfill
• ✓ Construction entrance pads
• ✓ Pipe bedding for large pipe
• ✓ Erosion control

#411 Gravel

• ✓ Driveways
• ✓ Driveway repairs
• ✓ Road base
• ✓ Parking areas

#4 Stone

• + Excellent drainage with 35 to 40 percent void space
• + Bridges soft ground better than smaller stone
• + Cheap, $20 to $40 per ton, and stocked everywhere
• + Angular pieces lock together under load
• + Same price as #57 with more drainage capacity

• − Too coarse to walk on or drive on as a surface
• − Needs a finer cap layer for any traffic
• − Hard to rake and spread by hand
• − Sinks into soft clay without fabric

#411 Gravel

• + Compacts firmly
• + Better drainage than crusher run
• + Smooth driving surface
• + Good for resurfacing existing driveways

• − Dusty when dry
• − Not decorative
• − Can soften if drainage is poor

#4 Stone

#4 stone is crushed rock screened to pieces between 1 and 1.5 inches, with some quarries running it up to 2 inches. It is angular with sharp fractured faces. Color follows the quarry: gray or blue-gray limestone in the Midwest and Northeast, gray to pink granite in the Southeast, tan limestone in Texas.

#411 Gravel

Blend of 3/4" stone and fine particles. Typically gray in color.