#4 Stone vs Rip Rap: Size, Cost, and Which to Use

#4 Stone

Sieve size #4 in the ASTM aggregate grading means most of the stone passes a 1.5-inch screen and stays on a 3/4-inch screen. In practice you get a pile of roughly walnut to golf ball sized rock. Every piece is angular because it was crushed, and those sharp edges lock together under load instead of rolling like river stone. Because it is washed or screened clean, there are no fines to fill the gaps between pieces. That is the whole point: about 35 to 40 percent of a pile of #4 is air, so water moves through it fast.

Rip Rap

Large, heavy, angular stones ranging from 6 to 24+ inches used primarily for erosion control. Rip rap protects shorelines, stream banks, bridge abutments, and steep slopes from water erosion. The heavy weight and interlocking shape resist displacement by flowing water and wave action.

#4 Stone

• ✓ Driveway and road base
• ✓ Drainage beds
• ✓ Retaining wall backfill
• ✓ Construction entrance pads
• ✓ Pipe bedding for large pipe
• ✓ Erosion control

Rip Rap

• ✓ Shoreline protection
• ✓ Stream bank stabilization
• ✓ Bridge abutments
• ✓ Steep slope stabilization
• ✓ Culvert outlets
• ✓ Retaining wall faces

#4 Stone

• + Excellent drainage with 35 to 40 percent void space
• + Bridges soft ground better than smaller stone
• + Cheap, $20 to $40 per ton, and stocked everywhere
• + Angular pieces lock together under load
• + Same price as #57 with more drainage capacity

• − Too coarse to walk on or drive on as a surface
• − Needs a finer cap layer for any traffic
• − Hard to rake and spread by hand
• − Sinks into soft clay without fabric

Rip Rap

• + Extremely effective at preventing water erosion
• + Heavy weight resists displacement by water
• + Long-lasting — lasts decades with no maintenance
• + Angular shape interlocks for stability
• + Natural appearance blends with waterside environments

• − Very heavy — requires heavy equipment to place
• − Expensive for large projects
• − Not suitable for foot traffic
• − Requires engineering design for major installations
• − Limited decorative appeal

#4 Stone

#4 stone is crushed rock screened to pieces between 1 and 1.5 inches, with some quarries running it up to 2 inches. It is angular with sharp fractured faces. Color follows the quarry: gray or blue-gray limestone in the Midwest and Northeast, gray to pink granite in the Southeast, tan limestone in Texas.

Rip Rap

Large angular stones typically 6-24 inches in diameter, though some applications use stones up to 36 inches or larger. Weight ranges from 25 to 500+ pounds per stone. Colors vary by source quarry — typically gray, blue-gray, tan, or brown. Sold by the ton rather than by the yard.