What Size Gravel for Driveway?

A well-built gravel driveway uses three layers of progressively smaller stone: Base Layer (4 inches) Use #3 stone (1-2 inches) or #4 stone (1.5-3 inches). These large angular stones create a stable foundation and won't sink into soft soil. A geotextile fabric under this layer prevents the stone from migrating into the subgrade. Middle Layer (4 inches) #57 stone (3/4 to 1 inch) is the standard choice. It fills the gaps in the base layer, adds stability, and provides a transition to the finer top layer. Top Layer (2-3 inches) #8 gravel (3/8 to 1/2 inch) or crushed limestone creates a smooth driving surface. Some homeowners prefer #411 (a blend of #57 stone and stone dust) because the dust fills voids and compacts into a very firm surface. What to Avoid Avoid using pea gravel or river rock for driveways — their rounded shape means they never lock together and will constantly shift under tires, creating ruts.

#57 Gravel vs Marble Chips

Side-by-side comparison of #57 Gravel and Marble Chips to help you choose the right gravel for your project.

Overview

#57 Gravel

Crushed stone approximately 3/4 to 1 inch in size. One of the most versatile and commonly used gravel sizes in both residential and commercial construction. #57 stone is the go-to aggregate for drainage, driveways, and concrete production.

Marble Chips

Marble chips are decorative, angular stones made from crushed marble. Their bright white color reflects heat and adds contrast in landscape designs.

Common Uses

#57 Gravel

✓ Driveways
✓ Drainage
✓ Concrete mix
✓ Pipe bedding
✓ Backfill
✓ Parking areas

Marble Chips

✓ Landscaping beds
✓ Garden borders
✓ Decorative ground cover

Pros & Cons

#57 Gravel

+ Extremely versatile — works for many applications
+ Excellent drainage characteristics
+ Good compaction when combined with fines
+ Widely available nationwide
+ Cost-effective

− Too coarse for comfortable walking
− Angular edges
− Shifts under foot traffic without stabilization
− Requires a finer top layer for driveways
− Not decorative

Marble Chips

+ Bright appearance
+ Reflects sunlight
+ Long-lasting

− Can discolor over time
− Poor compaction
− Glare in full sun

Cost Comparison

Measure	#57 Gravel	Marble Chips
Per ton	$20 – $35	$60 – $120
Per cubic yard	$25 – $45	$75 – $150

Sizes & Colors

#57 Gravel

#57 gravel consists of angular crushed stone pieces ranging from 3/4" to 1" in diameter. Color depends on the quarry source — typically gray, blue-gray, or brown. The stones are angular and irregular, which helps them interlock.

Marble Chips

Commonly available in 1/2"–1" sizes. Bright white to off-white.

Published February 11, 2026

Compare prices from local suppliers

Get quotes from gravel suppliers near you to find the best deal.

Find Suppliers