GoodGravel

#57 Gravel vs Rip Rap: Size, Cost, and Which to Use

#57 Gravel runs about $20 per ton and Rip Rap about $35 per ton. Compare size, drainage, compaction, and which one to use.

Overview

#57 Gravel

The 57 comes from the ASTM C33 grading table. Size #57 means most of the stone passes a 1-inch screen and stays on a #4 sieve (about 3/16 inch), with the bulk of it between 1/2 and 1 inch. It is "clean" stone, so there are no fines. That leaves about 35 percent air space in a pile, which is why it drains so well and why it stays loose on its own.

Rip Rap

Large, heavy, angular stones ranging from 6 to 24+ inches used primarily for erosion control. Rip rap protects shorelines, stream banks, bridge abutments, and steep slopes from water erosion. The heavy weight and interlocking shape resist displacement by flowing water and wave action.

Common Uses

#57 Gravel

  • Driveways
  • French drains
  • Concrete mix
  • Pipe bedding
  • Backfill
  • Parking pads
  • Septic systems

Rip Rap

  • Shoreline protection
  • Stream bank stabilization
  • Bridge abutments
  • Steep slope stabilization
  • Culvert outlets
  • Retaining wall faces

Pros & Cons

#57 Gravel

  • + Cheapest useful stone at $20 to $35 per ton
  • + Stocked at every quarry in the country
  • + Drains fast, about 35 percent void space
  • + Angular pieces interlock under load
  • + Works for driveways, drains, concrete, and backfill
  • Too coarse to walk on comfortably
  • Stays loose, rolls to the edges under tires
  • Needs a finer top layer on driveways
  • Not decorative

Rip Rap

  • + Extremely effective at preventing water erosion
  • + Heavy weight resists displacement by water
  • + Long-lasting — lasts decades with no maintenance
  • + Angular shape interlocks for stability
  • + Natural appearance blends with waterside environments
  • Very heavy — requires heavy equipment to place
  • Expensive for large projects
  • Not suitable for foot traffic
  • Requires engineering design for major installations
  • Limited decorative appeal

Cost Comparison

Measure #57 Gravel Rip Rap
Per ton $20 – $35 $35 – $80
Per cubic yard $25 – $45 $45 – $100

Sizes & Colors

#57 Gravel

#57 gravel is angular crushed stone screened to 3/4 inch to 1 inch, with a few pieces down to 1/2 inch. Color depends on the quarry: gray or blue-gray limestone through the Midwest and Northeast, gray, white, and pink granite in the Southeast, tan limestone in Texas, and dark basalt in the Northwest.

Rip Rap

Large angular stones typically 6-24 inches in diameter, though some applications use stones up to 36 inches or larger. Weight ranges from 25 to 500+ pounds per stone. Colors vary by source quarry — typically gray, blue-gray, tan, or brown. Sold by the ton rather than by the yard.

Published February 11, 2026

Compare prices from local suppliers

Get quotes from gravel suppliers near you to find the best deal.