Crushed Limestone vs Crusher Run: Size, Cost, and Which to Use
Crushed Limestone runs about $20 per ton and Crusher Run about $20 per ton. Compare size, drainage, compaction, and which one to use.
Overview
Crushed limestone is quarried limestone that has been crushed and screened into standard sizes from screenings to 3-inch rock. It costs $20 to $45 per ton in 2026, weighs 1.3 to 1.5 tons per cubic yard, and is the cheapest crushed stone across the Midwest, Texas, Florida, Pennsylvania, and any other region sitting on limestone bedrock. Its light color, low price, and the way its fines cement together under traffic make it the default driveway and road gravel in a big part of the country.
Crusher run is crushed stone with the rock dust left in, sold as 3/4 inch minus or 1.5 inch minus. It costs $20 to $35 per ton in 2026, weighs 1.5 to 1.7 tons per cubic yard, and packs into a surface hard enough to drive on year after year. It is the standard base under roads, driveways, parking lots, and patios, and the best single-layer material for a gravel driveway. In the Southeast it is called crush and run. Highway departments call it aggregate base course, ABC, or Class 5.
Common Uses
Crushed Limestone
- ✓ Driveways
- ✓ Road base
- ✓ Drainage
- ✓ Paver base
- ✓ Concrete aggregate
- ✓ Farm lanes and arenas
- ✓ Landscaping
Crusher Run
- ✓ Driveways
- ✓ Parking areas
- ✓ Road base
- ✓ Paver base
- ✓ Walkways
- ✓ Shed and equipment pads
Pros & Cons
Crushed Limestone
- + Cheapest crushed stone in the Midwest, Texas, and Florida
- + Fines cement together into a hard surface
- + Light color brightens driveways and beds
- + Every standard size available
- + Packs harder than granite crusher run
- − White dust in dry weather
- − Raises soil pH, bad for acid-loving plants
- − Softer, breaks down faster under heavy trucks
- − Expensive where it has to be trucked far
Crusher Run
- + Packs into a hard, drivable surface
- + Cheapest processed stone at $20 to $35 per ton
- + One layer does the whole driveway on firm ground
- + Grades smooth and repairs easily
- + Stocked at every quarry
- − Does not drain, sheds water instead
- − Dusty when dry, muddy when wet before it seals
- − Dense, so a ton covers less area than clean stone
- − Wrong choice for any drainage use
- − Plain gray look
Cost Comparison
| Measure | Crushed Limestone | Crusher Run |
|---|---|---|
| Per ton | $20 – $45 | $20 – $35 |
| Per cubic yard | $25 – $50 | $25 – $45 |
Sizes & Colors
Crushed Limestone
Crushed limestone comes in every standard sieve size: screenings under 1/4 inch, #8 (3/8 to 1/2 inch), #57 (3/4 to 1 inch), #4 (1 to 1.5 inch), #2 (2 to 3 inch), and crusher run (3/4 or 1.5 inch minus). It is angular when fresh and wears smoother than granite. Color runs white, cream, light gray, and tan, and it turns bright white as dust dries on the surface.
Crusher Run
Crusher run is everything that comes off the crusher below a set size, usually 3/4 inch minus or 1.5 inch minus: angular stone at the top of the range down to sand and rock dust. Roughly a third of the mix is fines. Color matches the quarry rock, typically gray limestone or gray to tan granite, and it lightens as the dust dries.
Published February 11, 2026
Compare prices from local suppliers
Get quotes from gravel suppliers near you to find the best deal.