Crusher Run vs Marble Chips: Size, Cost, and Which to Use

Crusher Run

Crusher run is crushed stone with the rock dust left in, sold as 3/4 inch minus or 1.5 inch minus. It costs $20 to $35 per ton in 2026, weighs 1.5 to 1.7 tons per cubic yard, and packs into a surface hard enough to drive on year after year. It is the standard base under roads, driveways, parking lots, and patios, and the best single-layer material for a gravel driveway. In the Southeast it is called crush and run. Highway departments call it aggregate base course, ABC, or Class 5.

Marble Chips

Marble chips are decorative, angular stones made from crushed marble. Their bright white color reflects heat and adds contrast in landscape designs.

Crusher Run

• ✓ Driveways
• ✓ Parking areas
• ✓ Road base
• ✓ Paver base
• ✓ Walkways
• ✓ Shed and equipment pads

Marble Chips

• ✓ Landscaping beds
• ✓ Garden borders
• ✓ Decorative ground cover

Crusher Run

• + Packs into a hard, drivable surface
• + Cheapest processed stone at $20 to $35 per ton
• + One layer does the whole driveway on firm ground
• + Grades smooth and repairs easily
• + Stocked at every quarry

• − Does not drain, sheds water instead
• − Dusty when dry, muddy when wet before it seals
• − Dense, so a ton covers less area than clean stone
• − Wrong choice for any drainage use
• − Plain gray look

Marble Chips

• + Bright appearance
• + Reflects sunlight
• + Long-lasting

• − Can discolor over time
• − Poor compaction
• − Glare in full sun

Crusher Run

Crusher run is everything that comes off the crusher below a set size, usually 3/4 inch minus or 1.5 inch minus: angular stone at the top of the range down to sand and rock dust. Roughly a third of the mix is fines. Color matches the quarry rock, typically gray limestone or gray to tan granite, and it lightens as the dust dries.

Marble Chips

Commonly available in 1/2"–1" sizes. Bright white to off-white.